The particularity of these panels is that on the inside of the panel, replace the plate by a polyester film which gives it durability.
On the outside we can change the each sheet by a sheet with a particularly corrosive treatment, which is especially suitable for aggressive gases from the slurry, causing the biggest problems of oxidation of the coated sheets. This corrosion sheet allows us to extend the warranty to 15 years, something unique in the market.
The ideal slope should always be greater than 7%.
This type of roof is mainly designed for farms or rural facilities with similar characteristics to the farms.
The gasket design of this panel allows easy handling and assembly ensuring the correct rainwater tightness.
The polyester sheet with which the inner face of the panel is made is highly resistant to the attack of microorganisms, bacteria, vapors and condensations of the acids present in the farms. In addition, the components with which this panel has been manufactured are not toxic, thus avoiding possible contamination of the farm.
The thermal insulation provided by the use of this cover protects animals.
The sandwich roof panel is specially designed and manufactured for industrial or residential roofs. This means that we can cover anything from a garage to a swimming pool or a large logistics centre. Moreover, we have the capacity to adapt to your needs at all times, both in design and in relation to the materials used for assembly.
This panel can say that is the most established in the market model, because its design with a flashing at the junction of each panel, leaving the screws covered with the same, is the most widely accepted by our customers.
These panels are made of an empty lambda overlapping on the next panel, leaving the bolt with a square washer holding on the two ribs.
© DIPPANEL
Distribution of Doors and Panels, S.L.
Avda. de los Dólmenes, 6
41907 - Valencina de la Concepción
(Seville)
Teléfono: (+34) 954 436 422
Móvil: (+34) 675 534 289
[email protected]
An incentive has been received from the Innovation and Development Agency of Andalusia IDEA, of the Regional Government of Andalusia, for an amount of Nineteen thousand twelve euros and fifty cents (19,012.50€), 80% co-financed by the European Union through the European Regional Development Fund, ERDF for the implementation of the project “Digitalization of warehouse management, manufacturing and Web Sales” with the objective of “Ensuring a better use of information technologies”.
DISTRIBUCION DE PUERTAS Y PANELES SOCIEDAD LIMITADA, CIF B91742627, has received a grant from the European Union under the Andalusia ERDF Operational Program 2014-2020, funded as part of the Union’s response to the COVID-19 pandemic (REACT-EU), to compensate for the extra energy cost of natural gas and/or electricity to SMEs and the self-employed especially affected by the increase in natural gas and electricity prices caused by the impact of Russia’s war of aggression against Ukraine.
Distribuciones de Puertas y Paneles, S.L. has been a beneficiary of European Funds, whose objective is to strengthen the sustainable growth and competitiveness of SMEs, and thanks to which it has launched an Action Plan with the aim of improving its competitiveness through digital transformation, online promotion and e-commerce in international markets during the year 2024. To this end, it has had the support of the Xpande Digital Program of the Chamber of Commerce of Seville. #EuropeFeels
