V for roof and facade

V for roof and facade

The advantages of the sheet are formed by the economy undoubted weight, strength, ease of transportation and handling, and mounting economy great aesthetic possibilities.

All shaped plates are made of high quality steel.
All of them can serve curved if the project requirements and require precise holes for easy assembly.

Corrugated or trapezoidal sheet 30mm

Maximum uniformly distributed load p (daN / m) for a value of deflection f ≤ l / 200. The values do not play a red arrow limitation. The data in the table refer to the calculations as indicated in standard UNI CNR – 10022/84 and instructions AIPPEG. Steel S 280 GD according to UNI EN 10147.

S Weight
(Peso)
Poids
J Wp Wn l = tabla_01
mm Kg / m2 cm4 / m cm3 / m cm3 / m 1,25 1,50 1,75 2,00 2,50 3,00
0,5 4,63 7,54 3,17 2,58 248 172 126 97 62 42
43
0,6 5,55 9,07 3,99 3,41 p =da N/m2 327 227 167 128 82 51
57
0,7 6,48 10,61 4,66 4,09 393 273 200 153 98 60
68

Corrugated or trapezoidal sheet 32mm

Maximum uniformly distributed load p (daN / m) for a value of deflection f ≤ l / 200. The values do not play a red arrow limitation. The data in the table refer to the calculations as indicated in standard UNI CNR – 10022/84 and instructions AIPPEG. Steel S 280 GD according to UNI EN 10147.

S Weight
(Peso)
Poids
J Wp Wn l =
mm Kg / m2 cm4 / m cm3 / m cm3 / m 1,25 1,50 1,75 2,00 2,50 3,00
0.5 4.91 10.44 4.49 4.11 434 302 222 170 102
109
59
75
0.6 5.89 12.84 5.68 5.19 p =da N/m2 548 381 280 214 125
137
72
95
0.7 6.87 15.02 6.89 6.16 650 451 332 254 146
163
85
113

Corrugated or trapezoidal sheet 40mm MT

Maximum uniformly distributed load p (daN / m) for a value of deflection f ≤ l / 200. The values do not play a red arrow limitation. The data in the table refer to the calculations as indicated in standard UNI CNR – 10022/84 and instructions AIPPEG. Steel S 280 GD according to UNI EN 10147.

S Weight
(Peso)
Poids
J Wp Wn l =
mm Kg / m2 cm4 / m cm3 / m cm3 / m 1,25 1,50 1,75 2,00 2,50 3,00
0.5 4.79 15.70 5.51 4.40 442 293 216 165 106 73
0.6 5.75 18.99 6.91 5.70 p =da N/m2 547 380 279 214 137 95
0.7 6.70 22.21 8.20 7.13 684 475 349 267 171 119
SANDWICH PANELS INDUSTRIAL PLANTS
SANDWICH PANEL FOR COVER
SANDWICH PANEL FOR WALL
ROCKWOOL SANDWICH PANEL
ROOFLIGHTS
V FOR ROOF AND FACADE
PROFILES AND MOUNTING ACCESORIES
AERATORS
PVC CLADDING PANELS FOR WALLS AND CEILINGS
Comparte esta noticia